Net Optics Network Performance Channel NetOptics & NP-Channel - Intelligent Network Access and Monitoring Solutions
Ortszeit  13:22
english version Versión en español deutschsprachige Version Versione italiana
 
 
 

Newsletteranmeldung
*:
*:
* PFLICHTFELDER
HINWEIS:
Ihre Daten werden nur für interne Zwecke genutzt und unter keinen Umständen an Dritte weitergegeben.
Unser Newsletter wird c.a. alle 2 Monate versendet.

Produkte > Zubehör

Tap Into Your Network
Zubehör-Produkte sind optional verfügbar um Ihre Net Optics Geräte passend in Ihre Netzwerkschränke einzubauen oder auch die Stromversorgung der TAPs zu zentralisieren.

Filtern nach     Topologie:
Medientyp:

DNM-101
NEW / NEU / NEUVE / NUEVO
Director Network Module, 10/100/1000Base-T mit Zero Delay
DNM-101

DNM-101
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media.

Trouble-Free Protection Against Link, Application and Power Failure

DNM-101 is changing the way the world stays online. This mighty module with Net Optics™ new Virtual Zero Delay™ (VZD) circuitry keeps traffic passing should a Director™ or Director Pro™ lose power. It´s all you need for continuous uptime - protecting your network, links and applications - no matter what!

The New Way to Say Reliability

Net Optics new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that your Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason - such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper Taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-101 VZD eliminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.

DNM-101: The "Good Night´s Sleep" Module

Now you can stop worrying about power and application failures. This revolutionary new technology, available exclusively from Net Optics, improves network reliability dramatically when using copper taps. It eliminates the delay typically caused when other Taps lose power. That small delay can cascade into much longer delays as devices on the link detect a failure and attempt to re-establish communication. The DNM-101 module is quick and simple to install in your Director or Director Pro.

DNM-101 offers 12 copper ports for 6 in-line "Tap" connections and easily plugs in to all models of Director and Director Pro.


DNM-101
 
Director Network Module, Inline, 10/100/1000Base-T, 12 Ports, mit Virtual Zero Delay

Performance
Hardware throughput: 12Gbps
Network recovery time: 40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical
Dimensions:1.35´ high x 10.38´ deep x 5.05´ wide
Weight: 1.5lbs

Indicators
(All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Certifications
Fully RoHS compliant

Interface
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Compatible with all models of Director and Director Pro

Part Numbers
10/100/1000 Copper In-Line,VZD Module: DNM-101


DNM-320, DNM-330
Director Network Module, 1 Gigabit ZX Singlemode
DNM-320, DNM-330

DNM-320, DNM-330
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-320
 
Director Network Module, Inline, 1 Gigabit ZX Singlemode, 8,5µm

DNM-330
 
Director Network Module, SPAN, 1 Gigabit ZX Singlemode, 8,5µm

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

DNM-300, DNM-302, DNM-310
Director Network Module, 1 Gigabit LX Singlemode
DNM-300, DNM-302, DNM-310

DNM-300, DNM-302, DNM-310
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-300
 
Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 50:50

DNM-302
 
Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 70:30

DNM-310
 
Director Network Module, SPAN, 1 Gigabit LX Singlemode, 8,5µm

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

DNM-200, DNM-202, DNM-210, DNM-220, DNM-222, DNM-230
Director Network Module, 1 Gigabit SX Multimode
DNM-200, DNM-202, DNM-210, DNM-220, DNM-222, DNM-230

DNM-200, DNM-202, DNM-210, DNM-220, DNM-222, DNM-230
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-200
 
Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 50:50

DNM-202
 
Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 70:30

DNM-210
 
Director Network Module, SPAN, 1 Gigabit SX Multimode, 62,5µm

DNM-220
 
Director Network Module, Inline, 1 Gigabit SX Multimode, 50µm, 50:50

DNM-222
 
Director Network Module, In-Line, 1 Gigabit SX Multimode, 50µm, 70:30

DNM-230
 
Director Network Module, SPAN, 1 Gigabit SX Multimode, 50µm

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

DNM-100 ,   DNM-110
Director Network Module, 10/100/1000Base-T
DNM-100 , DNM-110

DNM-100 ,   DNM-110
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-100
 
Director Network Module, Inline, 10/100/1000Base-T, 12 Ports

DNM-110
 
Director Network Module, SPAN, 10/100/1000Base-T, 12 Ports

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

DBM-100, DBM-200, DBM-250, DBM-300
iBypass HD Modules
DBM-100, DBM-200, DBM-250, DBM-300

DBM-100, DBM-200, DBM-250, DBM-300

DBM-100
 
DBM, 10/100/1000, RJ45

DBM-200
 
DBM, Gig, MM, 62.5um, SFP Monitor Ports

DBM-250
 
DBM, Gig, MM, 50um, SFP Monitor Ports

DBM-300
 
DBM, Gig, SM, 8.5um, SFP Monitor Ports


490-0655-001
Direct-Attach SFP+ Twinax Kabel
490-0655-001

490-0655-001 490-0655-001
Dieses Direct-Attach Kabel, auch Twinax-Kabel bezeichnet, spart Kosten, reduziert die Komplexität und erhöht die Zuverlässigkeit kurzer 10 Gigabit Netzwerkverbindungen.

The Direct-Attach Cable, also known as a twinax cable, saves cost, reduces complexity, and increases reliability of short 10 Gigabit network links.

This 5-meter copper cable attaches directly between two SFP+ slots in Net Optics data monitoring and network controller switches, and equipment from most leading network and monitoring suppliers. It carries 10 Gbps traffic at full bandwidth, without the need for expensive SFP+ transceivers and fiber cables.


490-0655-001
 
Direct-Attach SFP+ Twinax Kabel

Operating:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 5% min, 95% max, non-condensing

Length: 5 meters

Medium: Copper, passive

Data Rate: 10 Gbps

Connectors: (2) SFP+

Standards: SFF-8431 Compliant

Part Number: 490-0655-001

Compatibility:
Fully compatible with the following Net Optics product families:
- xBalancer
- Director xStream
- Director xStream Pro
- iLink Agg xStream


kein Bild
verfügbar
Fiber Cable Kit - Multimode
705-0027-001

These fiber cable kits give you all the cables you need to deploy a Net Optics Flex Tap MTP.

705-0027-001
 
Cable Kit, Cable Assembly, MTP/MTP, Multimode, OM4, 50µm


705-0012-001, 705-0013-001, 705-0015-001, 705-0016-001
Fiber Kabelkit - Multimode
705-0012-001, 705-0013-001, 705-0015-001, 705-0016-001

705-0012-001, 705-0013-001, 705-0015-001, 705-0016-001
These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC-connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap´s monitor outputs to plug into two NICs on the monitoring tool.

These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC- connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap’s monitor ouptuts from one duplex LC connector to two connectors that plug into two NICs on the monitoring tool.

Kits are available for all 10G and 1G singlemode (SM) and multimode (MM) media types. LC/LC cables have LC-type connectors on both ends, for use in LC-connectorized environments. LC/SC cables have LC-type connectors on the tap ends and SC connectors on the other ends, for use in SC-connectorized environments. With these cable kits, LC Fiber Taps can be used in all environments and there is no more need for bulky SC Fiber Taps.


705-0012-001
 
LC/LC connector, Multimode 50µm

705-0013-001
 
LC/LC connector, Multimode 62,5µm

705-0015-001
 
LC/SC connector, Multimode 50µm

705-0016-001
 
LC/SC connector, Multimode 62,5µm

Fiber Cable Kit Specifications:

Operating Specifications:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 5% min, 95% max, non-condensing

Dimensions:
Length: 3m, each cable

Fiber Type:
Multimode: Corning 50 or 62.5/125 µm, 850nm wavelength
Grade: OM3
Insertion Loss: 2 dB max
Singlemode: Corning 8.5/125 µm, 1310nm wavelength
Grade: OM3
Insertion Loss: 2 dB max

Connectors:
Network End: Duplex connectors, LC type
Monitoring End: Duplex connectors, LC or SC type (see chart)

Kit Contents:
(2) Duplex fiber optic cables
(1) Analyzer fiber optic cable

Part Numbers:
705-0012-001
705-0013-001
705-0015-001
705-0016-001

Passive, Secure Technology
  • All the cables you need to connect an LC Fiber Tap in an LC- or SC-connectorized environment
  • Custom analyzer breakout cable saves panel space
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer’s warranty
Ease of Use
  • Color coded to indicate media type
  • Short 3 meter length eliminates cable clutter
  • No need to stock SC Fiber Taps
  • Compatible with Net Optics LC Fiber Taps

705-0014-001, 705-0017-001
Fiber Kabelkit - Singlemode
705-0014-001, 705-0017-001

705-0014-001, 705-0017-001
These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC-connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap´s monitor outputs to plug into two NICs on the monitoring tool.

These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC- connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap’s monitor ouptuts from one duplex LC connector to two connectors that plug into two NICs on the monitoring tool.

Kits are available for all 10G and 1G singlemode (SM) and multimode (MM) media types. LC/LC cables have LC-type connectors on both ends, for use in LC-connectorized environments. LC/SC cables have LC-type connectors on the tap ends and SC connectors on the other ends, for use in SC-connectorized environments. With these cable kits, LC Fiber Taps can be used in all environments and there is no more need for bulky SC Fiber Taps.


705-0014-001
 
LC/LC connector, Singlemode 8,5µm

705-0017-001
 
LC/SC connector, Singlemode 8,5µm

Fiber Cable Kit Specifications:

Operating Specifications:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 5% min, 95% max, non-condensing

Dimensions:
Length: 3m, each cable

Fiber Type:
Multimode: Corning 50 or 62.5/125 µm, 850nm wavelength
Grade: OM3
Insertion Loss: 2 dB max
Singlemode: Corning 8.5/125 µm, 1310nm wavelength
Grade: OM3
Insertion Loss: 2 dB max

Connectors:
Network End: Duplex connectors, LC type
Monitoring End: Duplex connectors, LC or SC type (see chart)

Kit Contents:
(2) Duplex fiber optic cables
(1) Analyzer fiber optic cable

Part Numbers:
705-0014-001
705-0017-001

Passive, Secure Technology
  • All the cables you need to connect an LC Fiber Tap in an LC- or SC-connectorized environment
  • Custom analyzer breakout cable saves panel space
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer’s warranty
Ease of Use
  • Color coded to indicate media type
  • Short 3 meter length eliminates cable clutter
  • No need to stock SC Fiber Taps
  • Compatible with Net Optics LC Fiber Taps

PWR12-350
12 Volt 350W 12-Lead Stromversorgungsmodul
PWR12-350

PWR12-350
24 power leads in a 1U high rack-mountable chassis to support 24 single or 12 redundant power connections for Net Optics 10/100 and GigaBit Taps.

OverviewClean up your 12V DC Tap power connections. The Net Optics 12-Lead Power Supply packs two 12-lead power connections into 1U of rack of space. You now have the option to power 24 devices or 12 with redundant power connections. Multi voltage AC power enables worldwide interoperability for global deployments.

Combine up to 24 or 12 rack-mountable Net Optics 12V DC Taps, Port Aggregators and Dual Port Aggregators into one easy to manage supply. Each power lead delivers up to 2.4Amps across the two 12-lead connectors for a combined total of 350 Watts.

Easy to read front panel LEDs provide on the spot confirmation of power status.


PWR12-350
 
12 Volt 350W 12-Lead Stromversorgungsmodul

Operating Specifications:
Operating Temperature: 0°C to 70°C
Storage Temperature: -20°C to 85°C
Relative Humidity: 10% min, 95% max, non-condensing


Mechanical Specifications:

Power Supply:
AC input: 85-264 VAC, 47-63 Hz, 5 A max @ 115 VAC,
2.50A max @ 230 VAC
DC input: -48VDC nominal, -36 to -72VDC, 12.2 A max @ 36 VDC,
5.8 A max @ 72 VDC
DC output: 12V, 3.6A per lead (AC model), 2.4A per lead (DC model)
Output Power: 350 Watts

Dimensions: 1.75" high x 12.5" deep x 17" wide

Cable Interface:
Connector Type: DC Jack barrel type connector w/ 2.5 mm ID

Certifications:
Fully RoHS compliant
Part Number:
PWR12-350

Technology
  • Powers 24 single or 12 redundant power connections, eliminating clutter from multiple desktop power supplies.
  • Universal power enables worldwide deployment.
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer’s warranty
  • Optional 1 or 2 year extended warranty available at time of product purchase
Ease of Use
  • LEDs indicate input power
  • Accepts 110 and 220 VAC input
  • Strain-relief cable control
  • Two 12-lead connection sets support easy pairing for power redundancy
  • Two meter DC power leads for easy connection
  • Compatible with Net Optics 12 VDC devices

PWR12-350-8L
12 Volt 350W 8-Lead Stromversorgungsmodul
PWR12-350-8L

PWR12-350-8L
Eliminate the clutter of power bricks going to individual power connections with the use of Net Optics 8 Lead Power Supply. This dual AC input Power Supply contains 16 DC power leads in a 1U rack-mountable chassis. Power can be supplied to 16 single devices or the leads can be used in a redundant configuration that supports up to 8 devices.

Eliminate the clutter of power bricks going to individual power connections with the
use of Net Optics 8 Lead Power Supply. This dual AC input Power Supply contains
16 DC power leads in a 1U rack-mountable chassis. Power can be supplied to 16
single devices or the leads can be used in a redundant configuration that supports up
to 8 devices.
The use of Net Optics rack-mountable iTap Dual Port Aggregator Taps and iBypass
Switches will require using the 8 Lead Power Supply as it supports 3.6A per lead.
The unit is compatible with 100-230 VAC input, and delivers 350 Watts of power to
Net Optics 12 VDC devices worldwide.


PWR12-350-8L
 
12 Volt 350W 8-Lead Stromversorgungsmodul

Technology Features
  • Power for 16 single or 8 redundant power connections
  • Dual 8 lead connection sets support easy pairing for power redundancy
  • Universal power enables worldwide deployment
Ease of Use
  • LED indicators show redundant power status
  • Accepts 110 and 220 VAC input
  • Strain-relief cable control
  • Incorporates 19" rack mount frame for easy installation
  • Two meter DC power leads for easy connection
  • Compatible with all Net Optics iTap enabled 12 VDC devices

kein Bild
verfügbar
40 Gigabit QSFP+ Transceiver
QSFP+KT-SR, QSFP+KT-LR


QSFP+KT-SR
 
40 Gigabit QSFP+ Transceiver, SR

QSFP+KT-LR
 
40 Gigabit QSFP+ Transceiver, LR


XFPKT-SR, XFPKT-LR, XFPKT-ER
10 Gigabit Base XFP Transceiver
XFPKT-SR, XFPKT-LR, XFPKT-ER

XFPKT-SR, XFPKT-LR, XFPKT-ER

XFPKT-SR
 
10 Gigabit SR Base XFP Transceiver w/cable 62.5 or 50µm, 850nm

XFPKT-LR
 
10 Gigabit LR Base XFP Transceiver w/cable 8.5µm, 1310nm

XFPKT-ER
 
10 Gigabit ER Base XFP Transceiver w/cable 8.5µm, 1550nm


SFP+KT-SR, SFP+KT-50SR, SFP+KT-LR, SFP+KT-ER
10 Gigabit Base SFP+ Transceiver
SFP+KT-SR, SFP+KT-50SR, SFP+KT-LR, SFP+KT-ER

SFP+KT-SR, SFP+KT-50SR, SFP+KT-LR, SFP+KT-ER

SFP+KT-SR
 
10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm

SFP+KT-50SR
 
10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm

SFP+KT-LR
 
10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm

SFP+KT-ER
 
10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm


SFPKT-SX, SFPKT-50SX, SFPKT-LX, SFPKT-ZX, SFPKT-GCU
1 Gigabit Base SFP Transceiver
SFPKT-SX, SFPKT-50SX, SFPKT-LX, SFPKT-ZX, SFPKT-GCU

SFPKT-SX, SFPKT-50SX, SFPKT-LX, SFPKT-ZX, SFPKT-GCU SFPKT-SX, SFPKT-50SX, SFPKT-LX, SFPKT-ZX, SFPKT-GCU

SFPKT-SX
 
1 Gigabit SX Base SFP Transceiver w/cable 62,5 850nm

SFPKT-50SX
 
1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm

SFPKT-LX
 
1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm

SFPKT-ZX
 
1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm

SFPKT-GCU
 
1 Gigabit Copper SFP Transceiver


SFPKT-FX
100 Megabit Base SFP Transceiver
SFPKT-FX

SFPKT-FX

SFPKT-FX
 
100 Megabit FX Base SFP Transceiver w/cable 62,5µm, 1300nm


SFPKT-CU3
10/100/1000Base-T SFP Transceiver
SFPKT-CU3

SFPKT-CU3

SFPKT-CU3
 
10/100/1000Base-T SFP Transceiver w/cable


XF-2PWRDC
NEW / NEU / NEUVE / NUEVO
DC Stromversorgungsmodul
XF-2PWRDC

XF-2PWRDC

XF-2PWRDC
 
1 Gleichstrom (DC) Stromversorgungsmodul


XF-2PWRAC
NEW / NEU / NEUVE / NUEVO
AC Stromversorgungsmodul
XF-2PWRAC

XF-2PWRAC

XF-2PWRAC
 
1 Wechselstrom (AC) Stromversorgungsmodul


XF-2FAN
NEW / NEU / NEUVE / NUEVO
Ersatz-Lüftermodul
XF-2FAN

XF-2FAN

XF-2FAN
 
1 Ersatz-Lüftermodul


RK-FLEX-24
Flex Tap - Einbaurahmen
RK-FLEX-24

RK-FLEX-24 RK-FLEX-24
Das äußerst schmale Profil des Flex Taps erlaubt es Ihnen bis zu 24 Taps in einer Rack-Höheneinheit (1HE) zu installieren. Das Flex Tap kann innerhalb von 1 Gigabit, 10 Gigabit, 40 Gigabit und 100 Gigabit Netzwerken eingesetzt werden und unterstützt passives Netzwerk-Monitoring. Es ist als Multimode und Singlemode Modell erhältlich.

RK-FLEX-24
 
Rack Mount Frame


RK-12V2
Schaltschrankeinbaurahmen für 12x 4.5” in einem 4U Frame
RK-12V2

RK-12V2
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwölf 4, 5” breite Taps in einem 4U Frame auf.

12 Slot Einbaurahmen

Net Optics neue 19" Metall-Einbaurahmen sind in der Lage bis zu 12 Slim-Line Taps aufzunehmen. Eines der Features dieser innovativen Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die Einbaurahmen müssen separat bestellt werden wenn Sie ein Net Optics Tap-Produkt kaufen.

Die folgenden Taps werden unterstützt:

* 10/100/1000 Tap
* 10/100 Port Aggregator Taps

Features:

  • Flush Mount
  • 4U (7” x 19”)
  • Bis zu 12 Slim-Line Devices
  • Beinhaltet benötigtes Montagematerial für einen sofortigen Einsatz


RK-12V2
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwölf 4, 5” breite Taps in einem 4U Frame auf.


RK-12
Schaltschrankeinbaurahmen für 12x 4.5” in einem 4U Frame
RK-12

RK-12
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwölf 4, 5” breite Taps in einem 4U Frame auf.

12 Slot Einbaurahmen

Diese maßgeschneiderten Einbaurahmen sind speziell für die Montage von Net Optics Taps hin ausgelegt. Eines der Features dieser innovativen Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird.
Die 12-Slot Einbaurahmen sind kompatibel mit handelsüblichen 19" Racks und in der Lage bis zu zwölf 4.5" Taps innerhalb eines effizienten 4U-Designs aufzunehmen.


RK-12
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwölf 4, 5” breite Taps in einem 4U Frame auf.


RK-ITP2
Schaltschrankeinbaurahmen für 12x 8.75” in einem 1U Frame
RK-ITP2

RK-ITP2
Speziell entwickelt für die leichte Rack-Montage von Taps aus der Produktfamilie der intelligenten iTaps. Nimmt zwei 8.75” breite Taps in einem 1U Frame auf.

2 Slot iTap Einbaurahmen

Net Optics neue 19" Metall-Einbaurahmen sind speziell für die Aufnahme unserer Produkte aus der Familie der intelligenten iTaps hin ausgelegt. Eines der Features dieser innovativen Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die Einbaurahmen müssen separat bestellt werden wenn Sie ein Net Optics iTap-Produkt kaufen.

Die folgenden Taps werden unterstützt:

* iTap GigaBit Port Aggregators
* iTap 10/100/1000 Port Aggregator
* iBypass Switch

Features:

* Flush Mount
* 1U (1.75” x 19”)
* Für bis zu 2 Devices
* Beinhaltet benötigtes Montagematerial für einen sofortigen Einsatz


RK-ITP2
 
Speziell entwickelt für die leichte Rack-Montage von Taps aus der Produktfamilie der intelligenten iTaps. Nimmt zwei 8.75” breite Taps in einem 1U Frame auf.


RK-8V2
Schaltschrankeinbaurahmen für 8x 4” in einem 1U Frame
RK-8V2

RK-8V2
Speziell entwickelt für die leichte Rack-Montage von Net Optics LC Fiber Slim Taps. Nimmt acht 4” breite Taps in einem 1U Frame auf.

8 Slot Einbaurahmen

Diese maßgeschneiderten Einbaurahmen sind speziell für die Montage von Net Optics LC Fiber Slim Taps hin ausgelegt. Eines der Features dieser innovativen und schlanken Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die 8-Slot Einbaurahmen sind kompatibel mit handelsüblichen 19" Racks und in der Lage bis zu acht LC Fiber Slim Taps innerhalb eines effizienten 1U-Designs aufzunehmen.


RK-8V2
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics LC Fiber Slim Taps. Nimmt acht 4” breite Taps in einem 1U Frame auf.


RK-6V2
Schaltschrankeinbaurahmen für 6x 3.187” in einem 1U Frame
RK-6V2

RK-6V2
Speziell entwickelt für die leichte Rack-Montage von Net Optics Slim Taps. Nimmt sechs 3.187” breite Taps in einem 1U Frame auf.

6-Slot Einbaurahmen

Diese maßgeschneiderten Einbaurahmen sind speziell für die Montage von Net Optics Slim Taps hin ausgelegt. Eines der Features dieser innovativen und schlanken Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die 6-Slot Einbaurahmen sind kompatibel mit handelsüblichen 19" Racks und in der Lage bis zu sechs 3.187" Slim Taps innerhalb eines effizienten 1U-Designs aufzunehmen.


RK-6V2
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics Slim Taps. Nimmt sechs 3.187” breite Taps in einem 1U Frame auf.


RK-3V2
Schaltschrankeinbaurahmen für 3x 4.5” in einem 1U Frame
RK-3V2

RK-3V2
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt drei 4, 5” breite Taps in einem 1U Frame auf.

3-Slot Einbaurahmen

Diese maßgeschneiderten Einbaurahmen sind speziell für die Montage von Net Optics Taps hin ausgelegt. Eines der Features dieser innovativen und schlanken Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die Einbaurahmen müssen separat bestellt werden wenn Sie ein Net Optics Tap-Produkt kaufen.

Die folgenden Taps werden unterstützt:

* 10/100 Port Aggregator Taps
* 10/100/1000 Tap

Features:

* Flush Mount
* 1U (1.75” x 19”)
* Für bis zu 3 Devices
* Beinhaltet benötigtes Montagematerial für einen sofortigen Einsatz


RK-3V2
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt drei 4, 5” breite Taps in einem 1U Frame auf.


RK-3
Schaltschrankeinbaurahmen für 3x 4.5” in einem 1U Frame
RK-3

RK-3
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt drei 4, 5” breite Taps in einem 1U Frame auf.

3-Slot Einbaurahmen

Diese maßgeschneiderten Einbaurahmen sind speziell für die Montage von Net Optics Taps hin ausgelegt. Eines der Features dieser innovativen und schlanken Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die 3-Slot Einbaurahmen sind kompatibel mit handelsüblichen 19" Racks und in der Lage bis zu drei Taps innerhalb eines effizienten 1U-Designs aufzunehmen.


RK-3
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt drei 4, 5” breite Taps in einem 1U Frame auf.


RK-2V2
Schaltschrankeinbaurahmen für 2x 6.5” in einem 1U Frame
RK-2V2

RK-2V2
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwei 6.5” breite Taps in einem 1U Frame auf.

2-Slot Einbaurahmen

Net Optics neue 19" Metall-Einbaurahmen sind in der Lage 2 Taps aufzunehmen. Eines der Features dieser innovativen und schlanken Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die Einbaurahmen müssen separat bestellt werden wenn Sie ein Net Optics Tap-Produkt kaufen.

Die folgenden Taps werden unterstützt:

* GigaBit Port Aggregator Taps

Features:

* Flush Mount
* 1U (1.75” x 19”)
* Für bis zu 2 Devices
* Beinhaltet benötigtes Montagematerial für einen sofortigen Einsatz


RK-2V2
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwei 6.5” breite Taps in einem 1U Frame auf.


RK-2
Schaltschrankeinbaurahmen für 2x 6.5” in einem 1U Frame
RK-2

RK-2
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwei 6.5” breite Taps in einem 1U Frame auf.

2-Slot Einbaurahmen

Diese maßgeschneiderten Einbaurahmen sind speziell für die Montage von Net Optics Taps hin ausgelegt. Eines der Features dieser innovativen und schlanken Taps sind die integrierten Rändelschrauben die dafür sorgen, dass das Tap leicht durch Plug-n-Play im Einbaurahmen installiert werden kann ohne dass, dafür zusätzliches Werkzeug benötigt wird. Die 2-Slot Einbaurahmen sind kompatibel mit handelsüblichen 19" Racks und in der Lage bis zu zwei Taps innerhalb eines effizienten 1U-Designs aufzunehmen.


RK-2
 
Speziell entwickelt für die leichte Rack-Montage von Net Optics Taps. Nimmt zwei 6.5” breite Taps in einem 1U Frame auf.


WildPackets OmniPeek Enterprise
Umfassendes Monitoring & Analyse des Unternehmensnetzwerks
WildPackets OmniPeek Enterprise

WildPackets OmniPeek Enterprise

OmniPeek Enterprise is WildPackets’ flagship product. It combines all of the features of the OmniPeek product line in one product, including support for local captures from multiple interfaces and connections to an unlimited number of distributed Omnipliance network recorders.
It supports data collection from any network topology, including 10 Gigabit and Gigabit networks, and local matrix switches. OmniPeek Enterprise also provides advanced Voice and Video over IP functionality including signaling and Media analyses of voice and video, VoIP playback, voice and video Expert Analysis, Visual Expert, and more.

OmniPeek Enterprise is ideal for IT organizations responsible for network analysis and network service level agreements (SLAs) for the entire organization. A license of OmniPeek Enterprise should be considered for each location that will be supported by a network engineering professional.


WildPackets OmniPeek Enterprise
 
Comprehensive monitoring and analyzing of entire enterprise networks, including network segments at remote offices. Integrated support for Ethernet, Gigabit, 10 Gigabit, 802.11a/b/g/n wireless, VoIP, Video, MPLS, VLAN, and WAN



Network Performance Channel GmbH
Telephone/Telefon +49 (0)6103 906-722
Telephone/Telefon E-Mail senden
Kontaktformular Kontaktformular
Preisanfrage
*:
*:
*:
*:
*:
* PFLICHTFELDER
HINWEIS:
Ihre Daten werden nur für interne Zwecke oder zwecks Weiterleitung an den für Sie zuständigen Reseller genutzt und unter keinen Umständen an Dritte weitergegeben.
+49 (0)6103 906-722   |       |    Haftungsausschluss   |    AGB   |    Sitemap   |    Impressum
© 2013 by BRAIN FORCE Holding
. Send eMail with page link




Product Search