Produkte > Konverter

Net Optics 10 GigaBit Converters are optimized, high-performance media converters for connecting dissimilar 10 GigaBit devices and links. Deploy these bidirectional media converters individually to connect SR and LR fiber devices, or in pairs at each end of long-distance fiber links. These Converters are the perfect solution for dispersed networks where media conversion is required between multimode segments separated by long distances.

Fast and Versatile
The 10 GigaBit Converters support seamless media conversion at 10 Gbps over link distances up to 65 meters with 50/125 multimode SR fiber and up to 10 kilometers with singlemode LR fiber. These Converters feature XFP module connectors for quick reconfiguration and redeployment.

Long Link Reliability
To control jitter over long optical links, the Converter features Clock and Data Recovery (CDR). CDR ensures that the overall jitter budget is not exceeded when deploying converter pairs with long fiber links.

Simple and Reliable
Media conversion is a snap since all network and monitoring cables necessary for plug-and-play deployment are included with the Tap. For extra uptime protection, Net Optics Converters offer redundant power connections. Should the primary power source fail, the Converter automatically switches to the backup power source with no traffic interruption.

Net Optics GigaBit SX to TX Tap simplifies connecting GigaBit copper monitoring and security devices to SX fiber network links. Convert SX toTX and tap into the link with one device, reducing cost and complexity at the same time. GigaBit SX toTX Taps support passive monitoring of GigaBit links at 1000 Mbps.

Transparent Access
GigaBit SX toTX Taps establish permanent passive access ports without introducing a point of failure or disturbing other network connections. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1and Layer 2 errors.

Simply Plug It In
Full-duplex monitoring is a snap with supplied cables. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap. Everything you need, right out of the box.

Reliability
For extra uptime protection, Net Optics GigaBit SX to TX Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power source – even if power is lost and reapplied, there is always zero delay to network traffic.

Net Optics Singlemode to Multimode Converters are simple and reliable devices for connecting multimode fiber traffic to single mode fiber devices and links. Use these bi-directional media converters individually to connect 100Base-FX multimode and singlemode devices, or in pairs at each end of long-distance singlemode fiber links. These Converters are the perfect solution dispersed networks where media conversion required between multimode segments separated by long distances.

Fast and Versatile
The Singlemode to Multimode Converters support seamless media conversion at 100 Mbps over link distances up to 2 kilometers with 62.5/125 multimode fiber and up to 15 kilometers with 8.5/125 singlemode fiber. The Singlemode to Multimode Converter supports either full or half-duplex transmission.

Fault Tolerant and Reliable
Net Optics Singlemode to Multimode Converters incorporate Link Fault Signaling, which gives the devices connected to the Converter critical information about link status. If either side of the bi-directional link fails, the Converter immediately communicates the fault to both devices, reducing the time required to activate a redundant path. To control jitter over long optical links, the Converter features Clock and Data Recovery (CDR). CDR ensures that the overall jitter budget is not exceeded when deploying converter pairs with long fiber links.

Net Optics GigaBit LX to SX Converters are simple and reliable devices for connecting multimode fiber traffic to single mode fiber devices and links. Use these bi-directional media converters individually to connect LX and SX fiber devices, or in pairs at each end of long-distance singlemode fiber links. These Converters are the perfect solution for dispersed networks where media conversion required between multimode segments separated by long distances.

Fast and Versatile
The GigaBit LX to SX Converters support seamless media conversion at 1000 Mbps over link distances up to 550 meters with 50/125 multimode fiber (220 meters with 62.5/125) and up to 5 kilometers with singlemode fiber. The Converter supports either full or half-duplex transmission with auto-negotiation over the fiber link.

Fault Tolerant and Reliable
Net Optics GigaBit LX to SX Converters incorporate Link Fault Detect, which gives the devices connected to the Converter critical information about link status. If either side of the bi-directional link fails, the Converter immediately communicates the fault to both devices, reducing the time required to activate a redundant path. To control jitter over long optical links, the Converter features Clock and Data Recovery (CDR). CDR ensures that the overall jitter budget is not exceeded when deploying converter pairs with long fiber links.

For extra uptime protection, Net Optics Converters offer redundant power connections. Should the primary power source fail, the Converter automatically switches to the backup power source.

Net Optics GigaBit SX to TX Converters are simple and reliable devices for connecting GigaBit fiber traffic to copper devices and links. Use these bi-directional media converters individually to connect GigaBit copper and fiber devices, or in pairs at each end of long-distance fiber links. These Converters are the perfect solution for dispersed networks where media conversion required between copper network segments separated by long distances.

Fast and Versatile
The GigaBit SX to TX Converters support seamless media conversion at 1000 Mbps over link distances up to 550 meters with 50/125 multimode fiber and up to 5 kilometers with singlemode fiber. The Converter supports either full or half-duplex transmission with optional auto-negotiation over the fiber link and UTP port.

Fault Tolerant and Reliable
Net Optics GigaBit SX to TX Converters incorporate Link Fault Signaling, which gives the devices connected to the Converter critical information about link status. If either side of the bi-directional link fails, the Converter immediately communicates the fault to both devices, reducing the time required to activate a redundant path. To control jitter over long optical links, the Converter features Clock and Data Recovery (CDR). CDR ensures that the overall jitter budget is not exceeded when deploying converter pairs with long fiber links.

For extra uptime protection, Net Optics Converters offer redundant power connections. Should the primary power source fail, the Converter automatically switches to the backup power source.