Produkte > Regeneration Taps

10 GigaBit Span Regeneration Tap with SFP Monitor Ports Multimode and Singlemode Fiber
Net Optics 10 GigaBit Span Regeneration Taps add the flexibility of modular SFP+ monitor ports to solve the key physical layer challenges of multi-device monitoring for 10 Gigabit networks. For a complete picture of network health, these Taps fan out two 10 Gigabit switch Span ports to up to four different network management and security devices each.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor the same traffic simultaneously through one Regeneration Tap.

Modular SFP+ Ports
For optimal flexibility, these 10 GigaBit Regeneration Span Taps have SFP+ monitor ports so they can attach to monitoring equipment with any type of fiber interface: singlemode and multimode, and 62.5, 50, or 8.5 µm diameters. Just plug in the appropriate SFP+ transceiver modules for as many and whatever types of tools you want to connect. (1G SFP transceivers are not supported; the Regeneration Tap does not perform data rate conversion.)

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should one power source fail, the Tap continues to operate normally using only the remaining power source. Power LEDs on the front of the Tap indicate the current power sources.

GigaBit Regeneration Tap with SFP Monitor Ports Multimode and Singlemode Fiber
Net Optics GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for Gigabit networks. For a complete picture of network health, Regeneration Taps connect up to eight different network management and security devices at any single Gigabit network location.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor the same traffic simultaneously through a single one of these Taps.

Modular SFP Monitor Ports
For optimal flexibility, GigaBit Regeneration Taps have SFP monitor ports so they can attach to monitoring equipment with any type of interface - singlemode fiber, multimode fiber, and copper. Just plug in the appropriate SFP transceiver modules for as many and whatever types of tools you want to connect.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were inline, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should one power source fail, the Tap continues to operate normally using only the remaining power source. Power LEDs on the front of the Tap indicate the current power.

10 GigaBit Regeneration Tap with SFP Monitor Ports Multimode and Singlemode Fiber
Net Optics 10 GigaBit Regeneration Taps add the flexibility of modular SFP+ monitor ports to solve key physical layer challenges of multi-device monitoring for 10 Gigabit networks. For a complete picture of network health, Regeneration Taps connect up to eight different network management and security devices at any single 10 Gigabit network location.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor the same traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.

Modular SFP+ Monitoring Ports
These 10 GigaBit Regeneration Taps provide the added flexibility of SFP+ monitoring ports, which enable them to attach to monitoring equipment with any type of fiber interface: singlemode and multimode, and 62.5, 50, or 8.5 µm diameters. Just plug in the appropriate SFP+ transceiver modules for as many and whatever types of tools you want to connect. (1G SFP transceivers are not supported; the Regeneration Tap does not perform data rate conversion.)

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically
reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were inline, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should one power source fail, the Tap continues to operate normally using only the remaining power source. Power LEDs on the front of the Tap indicate the current power source.

GigaBit Regeneration Tap with SFP Monitor Ports Multimode and Singlemode Fiber
Net Optics GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for Gigabit networks. For a complete picture of network health, Regeneration Taps connect up to eight different network management and security devices at any single Gigabit network location.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor the same traffic simultaneously through a single one of these Taps.

Modular SFP Monitor Ports
For optimal flexibility, GigaBit Regeneration Taps have SFP monitor ports so they can attach to monitoring equipment with any type of interface - singlemode fiber, multimode fiber, and copper. Just plug in the appropriate SFP transceiver modules for as many and whatever types of tools you want to connect.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were inline, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should one power source fail, the Tap continues to operate normally using only the remaining power source. Power LEDs on the front of the Tap indicate the current power.

Net Optics 10 GigaBit Regeneration Taps solve the key physical layer challenges of attaching multiple 10 Gbps monitoring tools on 10 GigaBit fiber networks. For a complete picture of network health, Regeneration Taps copy identical traffic streams four or eight different network management and security devices for complete protocol trouble-shooting.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power source.

Net Optics 4x1 GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit fiber networks. For a complete picture of network health, these Taps connect up to four different network management and security devices at any single GigaBit network location.
One Tap, No Idle Resources

Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Net Optics 2x1 GigaBit Copper Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit copper networks. For a better picture of network health, these Taps connect two different network management and security devices at any single GigaBit network location.

For superior reliability, the GigaBit Copper Regeneration Tap features Link Fault Detect which gives the devices connected to the Tap critical information about link status. If either side of the bi-directional link fails, the Tap immediately communicates the fault to both devices, reducing the time required to activate a redundant path.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability
Forextra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Net Optics 2x1 GigaBit Span Regeneration Taps solve the key physical layer challenges of access to scarce spanning resources. For a complete picture of network health, these Taps connect two switch Span ports to up to four different network management and security devices. Each Span session can be independently monitored by up to two devices.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.

Span Port Sharing
When a Span session is connected into the Network A port, this data can be monitored simultaneously on all Monitor A ports. A second Span session can be monitored simultaneously on all Monitor B ports. The data on the Network A and Network B ports remains completely separate. Each monitoring device receives the same traffic in real time, providing a detailed picture of network health.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Net Optics 2x1 10/100BaseT Regeneration Taps solve the key physical layer challenges of multi-device monitoring for 10/100BaseT networks. For a complete picture of network health, these Taps connect two different network management and security devices at any single network location.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.

Zero Delay™ - A Net Optics Breakthrough
Highly sensitive network locations can improve monitoring performance via the innovative features of Net Optics Taps. If power is lost to other 10/100 Taps, the connected devices may introduce delays as they detect the power loss and try to re-establish their link.

Net Optics’ pioneering design ensures that any loss of power to the Tap is transparent to the network, and does not affect the flow of traffic through the Tap - eliminating packet delay and loss as potential security issues.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Net Optics 2x1 10/100 Span Regeneration Taps solve the key physical layer challenges of access to scarce spanning resources. For a complete picture of network health, these Taps connect two switch Span ports to up to four different network management and security devices. Each Span session can be independently monitored by up to two devices.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.

Span Port Sharing
When a Span session is connected into the Network A port, this data can be monitored simultaneously on all Monitor A ports. A second Span session can be monitored simultaneously on all Monitor B ports. The data on the Network A and Network B ports remains completely separate. Each monitoring device receives the same traffic in real time, providing a detailed picture of network health.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.